מאפיינים קטגוריה:מסורי נימה הספק מנוע חשמלי:90W מתח:230v, חד פזי מהירות מנוע:550-1650 סל"ד מהירות משתנה:כלול אורך להב:133 מ"מ משקל:15 ק"ג | אביזרים כניסה לשואב אבק:כלול תאורה:כלול | יכולות עבודה גובה חיתוך מרבי:50 מ"מ עומק חיתוך מרבי:405 מ"מ יכולות שיפוע, הטייה: |
מידות שולחן אורך:415 מ"מ רוחב:255 מ"מ | מידות אורך:630 מ"מ רוחב:320 מ"מ גובה:380 מ"מ |
מחק |
מחק |
מחק |
מחק |
מחק |
מחק |
מחק |
מחק |
מחק |
כרטיס ברכה (חינם) | ||
מתנה לאדם קרוב? רוצה להקדיש ברכה? בבקשה - הקלד תוכן ברכה בחלון זה: |
This saw compises two machines in one! The scroll saw takes care of the rough job, while the flexible shaft with drill chuck does the fine work.
For fine scroll saw work you need smooth edges without burrs in the cut shapes.
For this job, a multifunctional machines like the scheppach deco-flex is indispensable, as it saves an additional sanding unit.
On the top of the deco-flex there are two seats for the sawblade adapter that determine the correct length for sawblades without pin. The electronic speed control ensures a continuously variable working speed matched with the corresponding material. The solid parallel arm and the large, polished table top of aluminium, together with the work piece holder, guarantee optimum safety. A flexible work light to be switched on separately, ensures good sight. The suction connection piece guarantees clean work.
The flexible shaft is ideal for smallest tools for drilling, sanding, polishing, engraving, brushing and moulding.
Make two out of one: the multifunctional SD 1600f scroll saw.
Flexible shaft for drilling, sanding, polishing and graving etc.
Accepts saw-blades with or without pins.
Flexible work light ensures good sight while working.
Continuously variable working speeds to match your material.
Polished aluminium table.
28747PROXXON
ספירלי לולייני - לחיתוך לכל כיוון !! לעץ קשה ומתכת רכה! - These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1/16" (1.5mm) hole is required. Ideal for plastic, hard and soft woods.
49 ₪
28745PROXXON
Fine-toothed 25 TPI For cutting non-ferrous metals, glass-fibre reinforced plastics, plastics, Plexiglas and wood. 5" (127x1.76x0.25mm)
49 ₪
DS460PROXXON
Sturdy construction: Vibration-reducing base housing of cast steel, neatly CNC-processed and powder-coated. For stability and working without vibrations. Extremely light magnesium saw arms reduce the weight of the mass moved by approx. 40% compared to die-cast aluminium. 460mm throat!
2699 ₪
DSHPROXXON
מסור נימה אידיאלי לעבודות ניסור עדינות, שקט וללא רעידות - בניית מודלים, צעצועים, ייצור חלקים הדורשים דיוק רב וכד'
1699 ₪
MS51DREMEL
להב מסור לביצוע חתכים ישרים וחתכים מעוקלים בקוטר גדול בחומרי עץ ופלסטיק. ללהב זה 6 שיניים לסנטימטר, המאפשרות איזון אופטימלי בין מהירות לדיוק. אורך הלהב 100 מ"מ ועומק חיתוך 18 מ"מ
79 ₪