- מחרטה חזקה קומפקטית ואיכותית מבית PROXXON גרמניה.
- מחרטה מושלמת ליצירת מגוון רחב של אלמנטים מיניאטורים כגון: רגליים לכסא, קערות, כוסות, צלחות, מגוון תחתיות, עטים, אהילים, צעצועים ועוד מאות שימושים שונים.
- מנוע חשמלי איכותי זרם ישיר (DC), תוצרת יפן, בעל טכנולוגיה המאפשרת על שמירת כח רב גם במהירויות הנמוכות (ייחודי לכלים החשמליים תוצרת PROXXON).
- גיר העשוי מסיבי זכוכית מחוסמים המכוסים בסגסוגת אלומניום קלה – מאפשר עבודה שקטה במיוחד וללא רעידות.
- מפסק בעל וויסות מהירות אלקטרוני המאפשר התאמה מירבית לסוג החומר הנקדח ולקוטר המקדח.
- מרווח בין עוקצים: 250 מ”מ.
- פוטר על קוטר 10 מ”מ לייצור מגוון סוגים של אלמטים קטנים.
- כולל סט 6 יח’ קולטים במידות: 2, 3, 4, 6, 8, 10 מ”מ (מקורי PROXXON).
- כולל פלטה שטוחה עגולה לייצור אלמנטים גדולים, ו 2 עוקצים (קדמי ואחורי).
- הספק: 100 וואט (מקביל ל 300 וואט במנוע פחמים סטנדרטי).
- מהירות: 1,000 – 5,000 סל”ד, המהירות האיטית מעולה לצביעה באמצעות מכחול.
- קוטר מוט מקסימלי לעיבוד: 40 מ”מ
- משקל: 900 גרם
- דגם: DB 250
- גלוש PROXXON – לינק טכני למוצר באתר הבית בגרמניה!
MICRO woodturning lathe
Turning in miniature is a pleasing hobby.
One can make glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease. The electronic speed control assists in the lower range in a ‘semi-automated’ painting process.
Technical data:
Motor 223V. 100W. Centre distance of 250mm, 40mm swing. 25mm swing over support. Variable speed control covering between 1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tailstock travel 20mm. Includes 6 collets (2 – 3 – 4 – 6 – 8 – 10mm), drive centre, live centre and face plate.
|
The electronic speed control assists in the lower range in a ‘semi-automated’ painting process. |
|
Work pieces are secured by means of collets (1 each of 2 – 3 – 4 – 6 – 8 and 10mm are included). |
- Powerful drive motor with speed control between 1,000 and 5,000rpm.
- The bed is made from stable, thick-walled aluminium profile.
- Ball bearing spindle is bored through at 10mm. For series production of small parts.
- Square carrier with back centre and 10mm shaft.
- The stable tool rest is adjustable in all directions.
- Tailstock with quill travel.
- A face plate (for turning larger work pieces) is included.
חוות דעת
אין עדיין חוות דעת.