- Professional moisture measuring device for wood & building moisture.
- Bluetooth interface for measurement data transfer
- Material groups: selection of various wood & building materials enables material-specific measurements while increasing measuring accuracy.
- LED wet/dry indicator: 12 colour LEDs (green = dry, yellow = moist, red = wet) provide immediate measurement results for moisture content in the tested material.
- Quick localisation of moisture: comparison measurements can be made in Indicator-mode which reveal increasing or decreasing moisture based on a neutral scale.
- Round deep-insertion electrode (non-insulated) for moisture measurements in building & insulating materials between joints or joint intersections.
- Round deep-insertion electrode (insulated) for moisture measurements in concealed material layers to assess moisture distribution in multi-layer wall or ceiling structures.
- Brush deep-insertion electrode for moisture measurement in homogeneous building material without using a contact mass. Contact is established by the brush tip.
- Flat deep-insertion electrode (insulated) for targeted moisture measurements in concealed material layers to assess moisture distribution in multi-layer wall or ceiling structures. Electrodes can be inserted through edge strips or at the wall-ceiling transition.
DIMENSIONS (W x H x D) | 58 mm x 155 mm x 38 mm |
WEIGHT | 186 g |
POWER SUPPLY | Batteries 4 x 1.5 V Typ AAA |
PORT | Bluetooth 4.0 |
MAX. RELATIVE HUMIDITY | 85% |
MEASUREMENT RANGE / ACCURACY | wood: 0 – 30% / ± 1%, 30 – 60% / ± 2%, 60 – 90% / ± 4% other materials: ± 0.5% |
MATERIALS | Wood, anhydrite screed, concrete (C12/15, C20/25, C30/37), gypsum plaster, chalky sandstone, aerated concrete, cement screed (Other materials with table in manual) |
חוות דעת
אין עדיין חוות דעת.