מד עובי דופן מתכת כולל גשש 0.75-225 מ”מ לנחושת, אלומניום, טיטניום, פלסטיק, קרמיקה, זכוכית ועוד

₪4,699.00

למפרט המוצר לחץ כאן
Ultrasonic Thickness Gauge thickness meter Measure Range:1.2mm-225.0mm (steel)

שלח הודעת ווטסאפ

ניתן להזמנה מראש

הדפסה

דמי משלוח:	₪39.00
זמן אספקה:	עד 6 ימי עסקים
יצרן:	TIME SHIJIN Group
דגם:	TIME2130 TT300A
ברקוד:	006039600001
אחריות:	אחריות לשנה
מספר מכירה:	100276

Model	TIME2130
Measuring range	0.75mm~300mm（According to the material to be tested, the temperature measuring mode and the sensor may be）
Display Resolution	0.01mm or 0.1mm（＜100.0mm）；0.1mm（＞99.99mm）
Indication error	When the display resolution of 0.01mm：＜10.0mm：±0.05mm；≥10.0mm：±（0.5%H+0.01）mm When the display resolution of 0.1mm：＜10.0mm：±0.1mm；≥10.00mm：±（1%H+0.1）mm Use the following situations ZW5P probe：±（1%H+0.1）mm
Pipe measurement limit	φ20mmx0.3mm（5MHz probe） φ15mmx2.0mm（7MHz probe）
Indication error	≤0.1mm
Sound velocity measurement range	1000m/s~9999m/s
Ambient temperature	0℃~40℃
power supply	Two section 5 battery
power	Maximum operating current does not exceed 30mA
Dimensions	152mmx74mmx35mm
Weight	250g

TIME2130 ultrasonic thickness gauge for measuring hull, oil and gas pipelines, pressure vessels, boilers and other various sheet thickness and wall thickness, the material is measured either based on steel as the representative of the metal material may be plastic, nylon, etc. non-metallic materials. Because ultrasonic has good directivity, ultrasound measurements of metal, non-metallic materials, thickness, fast and accurate, non-polluting, especially in the permit only one side can touch the case, can show its advantages, widely used each management plays a major role, such as monitoring a variety of sheet metal, pipe wall thickness, the wall thickness of the container and boiler localized corrosion, rust situation in metallurgy, shipbuilding, machinery, chemicals, electric power, atomic energy and other industrial sectors in product testing widely used for safe operation of equipment and modernization has important significance.

1.TIME2130 ultrasonic thickness gauge can measure a variety of metals (steel, steel, cast iron, etc.) and non-metallic materials (glass, ceramics, quantity, etc.) Thickness

2. The automatic zero calibration repair system errors

3. Data transmission is equipped with a standard RS232 interface to communicate with the printer or PC

4. set the gauge, gauge measurement values outside the buzzer alarm automatically

5. backlit display suitable for measurements in poor light environment

6. can store, delete, view 500 measured values

7. Anti-measured speed of sound to measure the known thickness

8. The two-point calibration can improve measurement accuracy

9. The voltage provided prompt, automatic shutdown